The rated output power of XMS500 series AC and DC power supply of TDK Lambda is 500w, which is divided into Class I and Class II (ungrounded) structures. 6 dB margin and low leakage current less than 150 for series compliance curve B and radiation emission μ。 The high operating efficiency and mechanical design make the air flow speed of XMS500 only 1m/s under full load operation, reducing the noise. Applications include home care, hospitals, imaging and clinical diagnostic systems, as well as industrial, testing and measuring and communication equipment.
Input to output isolation is 4000 V (AC) (2 x MoPP), input to ground isolation 1500 V (AC) (1 x MoPP) and output to ground isolation 1500 V (AC) (1 x MoPP) are suitable for Class B and Class BF equipment. All models have passed IEC/EN/UL/CSA 60,601-1 and IEC/EN/UL/CSA 60,950-1 CE mark low voltage, EMC and RoHS2 directive certification. This series of products comply with EN 55011-B, EN 55032-B conduction and radiation emissions (applicable to Class I and II), EN 61000-3-2 harmonics, IEC 60601-1-2 version 4 and IEC 61000-4 immunity standards.
As a configurable product, engineers can choose from multiple standard options to optimize system performance and cost without paying development costs or minimum purchase quantities. Options include chassis type (including an internal low speed fan), selection of backup voltage, 12 V fixed or variable speed fan supply, remote on/off, AC fault, single or dual input fuses. The rated output can provide 12 V, 24 V, 36 V or 48 V and other voltage requirements. This product has a five-year warranty.
The XMS500 accepts input from 90 V (AC) to 264 V (AC), withstands 300 V (AC) for 5 seconds, and can operate at an ambient temperature of+70 ° C, with a linear drop of 2.5%/° C above 50 ° C. The size of the open frame plate is 102 mm x 180 mm x 37 mm, and the size of the u-groove is 107 mm x 180 mm x 39.5 mm. Low attitude allows installation in systems with limited space.
