The IR2113 is versatile, high-voltage, high-speed drivers designed to control power MOSFETs and IGBTs with precision and efficiency.
The UA741CN is a high-performance monolithic operational amplifier built on a single silicon chip, designed for a broad spectrum of analog applications. It features a high gain and operates across a wide range of voltages, making it exceptionally suitable for use in integrators, summing amplifiers, and general feedback circuits.
The W9751G6KB-25 is a 512Mbit DDR2 SDRAM chip organized into 8,388,608 words across 4 banks, each 16 bits wide. It supports high-speed data transfer rates of up to 1066Mb/sec per pin (DDR2-1066), making it suitable for a variety of general applications.
The LM2940S-5.0 is a positive voltage regulator capable of delivering up to 1 A of output current, with a typical dropout voltage of 0.5 V and a maximum of 1 V across the entire temperature range.
The NJM4556AL is a high-gain, high-output current dual operational amplifier designed to drive heavy loads with ease, including up to ±70mA into 150Ω loads, achieving an output voltage of ±10.5V. It supports low supply voltage operation, working effectively at ±2V or higher.
The KA7500B is a pulse-width modulation (PWM) control integrated circuit, primarily used in switch-mode power supplies and DC-DC converters. It has the capability to regulate output voltage and control power efficiency.
The ICL8038CCPD is a versatile waveform generator IC that can produce highly accurate sine, square, triangular, sawtooth, and pulse waveforms with minimal external components.
The BCP53 is a PNP silicon epitaxial transistor for audio amplifier applications. It’s designed for high current handling and moderate voltage capabilities, making it ideal for driving loads like small motors, relays, or LEDs.
The TEA2025B is a versatile monolithic IC housed in a 12+2+2 Powerdip package, specifically for use as a dual or bridge power audio amplifier.
The L9637D is a monolithic integrated circuit, supporting the ISO 9141 standard for efficient communication between vehicles and diagnostic tools.
The TDA7379 is an automotive audio amplifier for car audio systems. It can provide high output power, typically achieving 4×45W, making it suitable for driving various speaker configurations.
The IR2153 is an enhanced version of the widely-used IR2155 and IR2151 gate driver ICs, integrating a high-voltage half-bridge gate driver and a front-end oscillator, similar to the CMOS 555 timer. This improved design offers greater functionality and ease of use compared to its predecessors.
THGBMJG6C1LBAIL Introduction THGBMFG6C1LBAIL is an 8GB density e-MMC (embedded MultiMediaCard) module, housed in a compact 153-ball BGA (Ball Grid Array) package.
The LM723 is a monolithic integrated programmable voltage regulator, available in a 14-lead dual in-line plastic package and an SO-14 micro package.
The IR2104S is a high-voltage, high-speed driver to control power MOSFETs and IGBTs. It features both high-side and low-side output channels, which are interdependent, making it ideal for driving N-channel power MOSFETs or IGBTs in a variety of high-side configurations.
IRF540 MOSFET: Test Circuit, Pinout and Features
The SN65HVD230D is a CAN transceiver that adheres to the ISO 11898-2 High-Speed CAN Physical Layer standard.