R38163 / 5 and IR38363 / 5 are powered by Intel V ccio and V cmp power rails that require SVID support and Intel-based server applications. These devices do not need to be pre-programmed because they are pre-configured for Intel's needs and addresses.
&;
The IR38263 / 5 provides a 3-bit parallel VID (PVID) for powering Intel chipset P VNN rails and FPGAs. It is ideal for telecom applications that require constant frequency operation, and network and storage applications that require a large number of PMBus, accurate V output, and ultra-low ripple.
&;
This IPOL device family uses Infineon. OptiMOS 5. In addition, the 7 mm x 7 mm PQFN package with Cu clips enables the device to operate to 30A with minimal airflow.
&;
Pin compatible options can be used with or without PMBus. This series uses Infineon's advanced PWM engine to provide ultra-low ripple and jitter. Compared to other designs, they minimize noise and increase control bandwidth while requiring less capacitance
&;
True differential voltage detection, sufficient margin and 0.5% Vref accuracy work together to provide a V output accuracy greater than 1%.
&;
With the introduction of the end-to-end enterprise power series, Infineon's complete solutions include intelligent digital controllers as well as high-performance IPOL and power stages.
