The DM74ALS165 is an 8-bit serial register that, when clocked, shifts the data toward serial output, QH. Parallelin access to each stage is provided by eight individual direct data inputs that are enabled by a low level at the SH/LD input. The DM74ALS165 also features a clock inhibit function and a complemented serial output, QH.
The PTH05010 series of non-isolated power modules are small in size but big on performance and flexibility. Their high output current, compact footprint, and industry-leading features offers system designers a versatile module for powering complex multi-processor digital systems.
The ADM3053 is an Isolation Controller LAN (CAN) physical layer transceiver with an integrated isolation dc-to-dc converter that complies with ISO 11898 standards. The unit is powered by a single 5 V power supply, enabling a fully isolated CAN solution.
The IDT85304-01 is a low-tilt, high-performance 1-to-5 difference-to-3.3V LVPECL clock generator - voltage divider. It has two optional clock inputs. The guaranteed output and partial to partial tilt characteristics make the IDT85304-01 ideal for those applications requiring good performance and repeatability.
The DS1100L is a 3.3V version of the DS1100. It is characterized for operation over the range 3.0V to 3.6V. The DS1100L series delay lines have five equally spaced taps providing delays from 4ns to 500ns. These devices are offered in surface-mount packages to save PCB area. Low cost and superior reliability over hybrid technology is achieved by the combination of a 100% silicon delay line and industry-standard µMAX and SO packaging
The WM8741 is a very high performance stereo DAC designed for audio applications such as professional recording systems, A/V receivers and high specification CD, DVD and home theatre systems. The device supports PCM data input word lengths from 16 to 32-bits and sampling rates up to 192kHz. The WM8741 also supports DSD bitstream data format, in both direct DSD and PCM-converted DSD modes.
The X9410 integrates two digitally controlled potentiometers (XDCPS) on a monolithic CMOS integrated circuit. The digital control potentiometer is realized by a series array of 63 resistance elements. XDCP can be used as a three-terminal potentiometer or a two-end variable resistor for a variety of applications including control, parameter adjustment, and signal processing.
The LT1999 is a high speed precision current sense amplifier, designed to monitor bidirectional currents over a wide common mode range. The LT1999 is offered in three gain options: 10V/V, 20V/V, and 50V/V
The MAX8875 low-dropout linear regulator operates from a +2.5V to +6.5V input range and delivers up to 150mA. A P-channel MOSFET pass transistor allows its 85µA supply current to remain independent of the load, making this device ideal for battery-operated portable equipment such as PCS phones, cellular phones, cordless phones, and modems.
The TPS3809 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems. The newer TLV809E device is an alternative with the same pins, functions and electrical parameters.
The Si9712 combines low on-resistance, slow ramp time, and the overall optimal performance of the smart switch in an integrated PC card interface switch. Si9712 is available in two standards and lead-free (Pb) The bag.
The LTM2882 is a complete galvanically isolated dual RS232 µModule (micromodule)transceiver. No external components are required. A single 3.3V or 5V supply powers both sides of the interface through an integrated, isolated DC/DC converter. A logic supply pin allows easy interfacing with different logic levels from 1.62V to 5.5V, independent of the main supply.
The LT5516 is an 800MHz to 1.5GHz direct conversion quadrature demodulator optimized for high linearity receiver applications. It is suitable for communications receivers where an RF or IF signal is directly converted into I and Q baseband signals with bandwidth up to 260MHz. The LT5516 incorporates balanced I and Q mixers, LO buffer amplifiers and a precision, high frequency quadrature generator
The IDT6116SA/LA is a 16,384-bit high-speed static RAM organized as 2K x 8. It is fabricated using IDT's high-performance, high-reliability CMOS technology.
The TAS3208 is a highly integrated audio system-on-chip (SOC) that includes a fully programmable 48-bit digital audio processor, 10:1 stereo analog input MUX, stereo ADC, six Dacs, and other analog features.
The LTC4311 is a dual I2C active pull-up designed to enhance data transmission speed and reliability for bus loading conditions well beyond the 400pF I2C specifi cation limit. The LTC4311 operates at supply voltages from 1.6V to 5.5V and is also compatible with SMBus.
The 'LVT16244B devices are 16-bit buffers and line drivers designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. These devices provide true outputs and symmetrical active-low output-enable (OE) inputs.
The RT9715 is a low-cost, low-voltage, single N-MOSFET high-side power switch IC suitable for USB applications. The RT9715 is the ideal solution for USB power and can support flexible applications as it comes in a variety of packages such as the SOT-23-5, SOP-8, MSOP-8 and WDFN 8L 3x3.
