IRAM336-025SB is a multi-chip hybrid IC for low power electrical motor control applications such as fans, pumps and refrigerator compressors. A compact Single in line (SIP-S) package minimizes PCB space. Several built-in protection features such as temperature feedback, shot prevention, undervoltage locking and shutdown input make this a very powerful solution.
The LMZ35003 Power module is an easy-to-use integrated power solution that integrates 2.5a DC/DC converters with shielded inductors and passivity into a low-profile QFN package. And provides the flexibility and function set of discrete load point design, ideal for powering a wide range of ics and systems. Advanced packaging technology provides a powerful and reliable power solution compatible with standard QFN installation and testing techniques.
The IR3596 is a flexible single-loop digital polyphase step-down controller that can be configured as a 1, 2 or 3 phase system when combined with an IR Dual 6x8mm IR3548 or IR355x power level. Power consumption is minimized while maintaining full digital capability and flexibility. Digital nonlinear transient control allows low frequency operations to achieve maximum efficiency while providing minimal all-ceramic output capacitance solutions.
The ISL91117 is a highly integrated boost switch regulator for battery powered applications. The device provides power solutions for products using two - or three-cell alkaline, NiCd or NiMH, or single-cell lithium-ion or lithium polymer batteries. The size of the power solution is minimized with a 2.34mm x 1.72mm WLCSP and a 2.6MHz switching frequency, which allows the use of tiny, low-size inductors and ceramic capacitors to minimize the size of the solution.
TSC2302 is a highly integrated pda analog interface circuit. Supplied with 48-pin QFN. It contains a full 12-bit a /Dresistive Touch Screen converter (ADC) including driver, touch pressure measurement function, and 8-bit D/ a converter (DAC) output for LCD contrast control.
The LTC4227 provides ideal diode or hot swap functionality for both power tracks by controlling an external nchannelmosfet. As an ideal diode, the MOSFETs replace two high-power Schottky diodes and associated heat sinks, saving power and board area. A hot-swap control MOSFET allows a plate to be securely inserted and operated from the active backplane by limiting the influx current. The power output also protects against short-circuit failures with fast-acting current limiting and internal timing circuit breakers
ISL6605 is a high-frequency MOSFET driver, which optimizes the topology of two n-channel power MOSFETs in synchronous rectification buck converter. The driver is combined with Intersil HIP63xx or ISL65xx polyphase step-down PWM controller to form a complete single-stage core voltage regulator solution with high efficiency at high switching frequency, suitable for advanced microprocessors.
The PWR13XXC Series offers a broad line of low-cost, high-isolation voltage, unregulated, single and dual output DC/DC converters in a 24-pin DIP package. These small converters offer a 4000V isolation rating in a 1.25" x 0.8" package area. The dielectric withstand characteristics of each converter is tested in production to ensure barrier integrity.
TB9083FTG is a front-drive IC for brushless motors in vehicles. In addition to the three-phase predriver, it has a safety relay predriver built in. It also includes charge pump, motor current detection circuit, oscillator circuit and SPI communication circuit. It has a variety of error detection capabilities. Trigger thresholds, response actions, and other Settings are modified by SPI. The TB9083FTG is also equipped with ABIST/LBIST for testing and evaluation of error detection capabilities
The ACPM-7881 is a high performance W-CDMA power amplifier module in a 4x4x1.1mm package. Using surface mount RF package design, with high cost and size competitiveness
Vishay Intertechnology has announced the upgrade of the TSOP2xxx, TSOP4xxx, TSOP57xxx, TSOP6xxx and TSOP77xxx series of infrared (IR) receiver modules with the new generation Cyllene 2 IC. The new IC is designed to ensure long-term supply and shorter lead times, helping designers significantly reduce supply currents over a wider range of supply voltages, while improving reliability against ESD and direct sunlight
The LT1767 is a 1.25MHz monolithic step-down switch regulator. The t1767 is an 8-pin lead-plated frame package and a low thermal resistance exposed liner package. Provides full cycle cycle term flow and thermal shutdown. High-frequency operation allows for reduced input and output filtering elements and allows the use of on-chip inductors.
Silicon Lab's ultra-low power digital isolators family are CMOS devices that offer significant data rate, propagation delay, power, size, reliability, and external BOM advantages over traditional isolation technologies. Car grades can be used for some parts numbers. These products are built using car-specific processes at all steps in the manufacturing process to ensure the robustness and low defects required for automotive applications.
The LT3060 series is a low-power, low-dropout (LDO) linear regulator that operates in the range of 1.6V to 45V input power supply. There are fixed output voltages of 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V and 15V, and adjustable voltage regulators with output voltage ranging from 600mV to 44.5V. The LT3060 voltage regulator uses thermally enhanced 8-lead TSOT-23 and 8-lead (2mm × 2mm × 0.75mm) DFN package.
AP1510 consists of step-down switch regulator and PWM control. These devices include reference voltage sources, oscillating circuits, error amplifiers and internal PMOS. AP1510 has low ripple power, high efficiency and excellent transient characteristics. Because the converter can accommodate up to 23V input voltage, it is also suitable for operation through AC adapters
RT8293A is a high efficiency monolithic synchronous step-down DC/DC converter that delivers up to 3A output current from 4.5V to 23V input power supply. Packaged in SOP-8 (Exposed Pad). The RT8293A also provides output voltage protection and thermal shutdown protection. Low current (< 3μA) Off mode provides output disconnect, making the battery powered system easy power management.
The MAX6338 quad voltage monitor is capable of monitoring up to four power supplies without any external components. Internal bandgap reference ensures accurate trip thresholds over the extended operating temperature range (-40°C to +85°C). The MAX6338 consumes 25µA(typical) supply current and operates at +2.5V to +5.5V. The MAX6338 comes in a 10-pin µMAX package.
The LT1161 is a four-extremely high-side gate driver that allows the use of low-cost n-channel power MosFeTs for high-side switching applications. It has four separate switching channels, each containing a fully separate charge pump to fully enhance N-channel MOSFET switches with no external components.
