FTDI Chips has announced a new development solution. The hardware is based on FT4233HP multi-channel interface chip. The new high-speed USB Serial /FIFO evaluation board will allow engineers to start implementing USB power delivery schedules more quickly. The size of the board is 138.5mm x 77mm. It provides one pair of type-c power output ports. The first port can serve as both the receiver (receiving power) and the source (providing power). The second port serves only as a receiver
Toshiba Electronics Europe offers 12 new motor control MCUS in its M4K series of devices. This is the first product in the new advanced TXZ+ family. They are beginning mass production of another 10 motor control MCUS in the M4M group. All of these products are based on the ARM Cortex-M4 core, with FPU and MPU, running at speeds up to 160MHz, and MCU providing onboard flash memory (128kB/256kB) of code and 32kB of data, as well as 24kB of plain RAM and DMAC
Binder offers new control cabinet feed-through connectors with different codes and pin numbers for the M12 series 713, 813, 814, 823 and 824. M12 connections provide efficient, reliable and economical cabling for fieldbuses, sensors and actuators in the field of automation technology. They are suitable for operating temperatures between -40℃ and +85℃ (814 series :-25℃ to +85℃).
Concurrent Technologies has introduced a new 3U VPX plug-in card (PIC). The TR K9x/ 6SD-RCX is based on the 11th generation Intel core processor, which has four CPU cores and comes with 16GB of welded DDR4 DRAM with in-error correction code for high-performance general-purpose computing tasks.
Laird Thermal Systems has released its enhanced OptoTEC OTX/HTX series of miniature thermoelectric coolers that offer a 10% increase in cooling capacity compared to standard thermoelectric coolers, with greater temperature differences and greater efficiency. High-performance solid state cooling units are used to control the temperature of thermally sensitive optoelectronic components, occupying an area as small as 3mm × 4mm, and are suitable for optoelectronic applications with tight geometric space constraints. There are two versions of this series.
Qvo QPF4532 5.0ghz wi-Fi-6 front end module (FEM) is optimized for IEEE 802.11ax systems. The QPF4532 has a frequency range of 5150MHz to 5850MHz, up to 31dB transmission gain, and a low 2dB noise figure. At 3.3V supply voltage, the performance of the finite element method is focused on optimizing PA. This feature saves power consumption while maintaining high linear output power and leading-edge throughput
Anson Semiconductor has added a 16-megapixel sensor to the XGS family, the XGS 16000. The device has the same construction and footprint as other XGS CMOS image sensors and supports 65fps full resolution readings. The device is designed with a unique 1:1 square aspect ratio and ensures optimal light sensitivity. The sensor is compatible with industry standard camera formats of 29mm2, using commercial c-mount lenses
Distec GmbH has introduced the new Tianma TFT display TM116VDSP01-00. Offers 1920 x 1080 pixel high resolution and 1600 CD /m² brightness, as well as a wide operating temperature range of -20℃ to +80℃. For intuitive operation display, the screen offers the PCAP multi-touch screen in a modern design with up to 10 contacts, and the display offers optional protective glass to resist adverse external influences in public places or other challenging areas
Abaco Systems now offers a Hardware Development Kit (HDK). The new Xilinx Vivado ML Editions suite of tools incorporates specific features that allow users to implement custom IP while maintaining the overall integrity of Abaco IP. Building on Xilinx Dynamic Function Exchange (DFX) functionality, the company developed a static design consisting of its proprietary IP, while leaving room in the FPGA for the user's custom design for dynamic programmable areas.
Laird Connectivity Mini NanoBlade Flex 6GHz antenna supports Wi-Fi 6E and operates in frequency ranges from 2400MHz to 2500MHz, 4900MHz to 6000MHz, and 6000MHz to 7125MHz.
The Siretta SL500-LTE1 (EU) modem from RS Components is a low-power LTE Cat 1 modem for establishing data connections over LTE cellular networks. The modem uses an embedded STM32F405 ARM Cortex M4 core processor for advanced functionality
Microchip Technologies may achieve 5G performance with the first single-chip, highly integrated, low-power, multi-channel IC with the company's IEEE 1588 PTP and clock recovery algorithm software modules. The company's measurement, calibration and adjustment ability to ensure that the 5 G system to provide the ITU -t standard g. 8273.2 C (30 ns Max | | TE) and new class D (5 ns Max | TEL |) time error requirement, through five low jitter synthesizer, The platform provides the 100fs RMS jitter performance required for high-speed interfaces in the latest 5G RU, DU and CU systems.
Diodes Incorporated has increased its wide range of linear heavy drive ics. With speeds up to 20Gbps, this UPI 2.0 and PCIe 4.0 compatible device offers eight differential channels. Due to its programmable linear equalization, output swing and flat gain capabilities, the device reduces BER and ISI, thus extending channel coverage over mixed physical media, operating temperature range from -40 ° C to +85 ° C and offering 116-pin QFN package (measuring 13 mm x 7 mm)
The size of the closed switching power supply is 101.6 × 203.1 × 40.6mm. It operates in the ambient temperature range of -40℃ to 70℃, provides low ripple and noise, and has low standby power consumption. Products comply with IEC/EN/UL62638, EN60335, EN61558, IEC/EN60601 and GB4943 standards
RECOM RAC05-K/PD3/H is a board-mounted family of 5W Class II AC/DC converters that provide 5V, 12V or 15V single outputs and include enhanced clearances to meet OVCIII up to 5000m heights. The series is fully protected against short circuit and over voltage in case of internal anomalies, meets EN 55032 Class B EMI emission levels (floating output), has no external components, and no load power consumption is less than 0.5W
Renesas Electronics announced the joint development of a multi-mode AI voice control solution. The RZ/V series of vision AI microprocessors combine with the low-power multi-mode, multi-feature Syntiant NDP120 neural decision processor to provide advanced speech and image processing capabilities. Winning Combination is part of a company that offers a compelling portfolio of analog, power and embedded processing products to help customers accelerate their designs and get to market faster.
The new IRS3078 polyurethane potting composite is available from Intertronics. The compound is a semi-rigid, room temperature cured and electrically insulated black polyurethane pooping compound. The RS3078-50Kit includes everything needed for mixing and dispensing materials - 50ml epoxy barrel, syringe gun and three static mixing nozzles. The mixing weight of the material is 0.90:1, the volume is 1:1, and the viscosity is 2000mpa. Service life at room temperature is 6 minutes
Parker Hannifin's Chomerics division launched three new Pro-Shield products for the European market. Pro-shield 7100 is a nickel-filled conductive coating, Pro-Shield 7108 is available as an aerosol can, and Pro-Shield 7002 is a corrosion-resistant conductive silicone sealant. A range of paints, paints and sealants enables users to produce plastic components with stable emi shielding. Applications in industries such as electronics, telecommunications and healthcare could benefit.
